With the Puls-air heater save 50 % of your heating costs +43 664 1308485

← All references

SAPERE, spol. S r.o, Prag, Tschechien

Just 350 litres of heating oil for 1,200 cubic metres

This is how cost-effectively large spaces can be heated quickly and reliably using the Puls-air workshop and industrial hall heating system. In this example, we are in the Czech Republic, near Prague, at the premises of SAPERE, spol. S r.o.
This well-insulated hall has a volume of 1,200 cubic metres and, according to the customer, requires only around 350 litres of heating oil per year.

Simple commissioning, rapid heat

Puls-air is not only the most economical heating system in the world; commissioning it is also child’s play. The units are delivered fully operational on a Euro pallet. Simply plug them into a 220-volt power supply, route the 35 mm stainless steel flue pipe over the roof to the outside – and you’re done. No conventional chimney with a large diameter of over 10 centimetres is required – so the costs of commissioning are very low.
Puls-air is placed on the floor of the room to be heated, requires less than 0.5 m² (75 x 55 cm) of floor space and is only 95 cm high. The warm air is released exactly where it is needed and does not linger at the ceiling. Thanks to the fan built into the unit, the warm air circulates throughout the room without creating a draught. This ensures that the entire room is heated evenly and efficiently. Compact, yet powerful. Jan Mrakota from SAPERE, spol. S r.o also confirms that the heater brings the room up to the temperature set on the thermostat – approximately 15–17 degrees – very quickly; in particular, he highlights the rapid heat output, economical operation and simple commissioning.

How can Puls-air be so much more economical?

This is down to the patented pulsating combustion process, which achieves a sustained efficiency of 97 per cent. A pulsating column of gas forms in the combustion chamber, changing direction 64 times per second. As a result, the fresh air and fuel molecules repeatedly collide with the exhaust gas molecules, leading to many small individual explosions. This movement and the explosions generate a great deal of heat whilst consuming very little fuel.
No maintenance costs
Pulsating combustion breaks down the outermost layer (soot layer) of the exhaust gas molecules. Consequently, no soot is produced during combustion – soot index 00 – meaning no maintenance costs.

Patented technology from Austria

The pulsating combustion technology in Puls-air heaters has already been awarded the State Prize twice. Further information is available on the website www.pulsair.net
Mr Mrakota from SAPERE, spol. S r.o recommends Puls-air to all workshop and hall owners who want a reliable heating system that heats large spaces quickly and cost-effectively.

DE IT NL FR DA